#!/bin/sh
# Modefi 2013/1 read sw & etc
echo "Starting rcS..."

echo "++ Mounting filesystem"
mount -t proc none /proc
mount -t sysfs none /sys
mount -t tmpfs none /tmp

echo "++ Setting up mdev"

echo /sbin/mdev > /proc/sys/kernel/hotplug
mdev -s

mkdir -p /dev/pts
mkdir -p /dev/i2c
mount -t devpts devpts /dev/pts

echo "++ Configure static IP 192.168.0.10"
ifconfig eth0 down
ifconfig eth0 192.168.0.10 up

echo "++ Starting telnet daemon"
telnetd -l /bin/sh

echo "++ Starting http daemon"
httpd -h /var/www

echo "++ Starting ftp daemon"
tcpsvd 0:21 ftpd ftpd -w /&

echo "++ Starting dropbear (ssh) daemon"
dropbear

echo "++ Starting OLED Display"
load_oled
# Bottun  L/R/U/D/S Data -> 0x100*1/2/3/4/5
echo "++ Exporting LEDs & SWs"
for i in 0 1 2 3 4 5 6 7 8 9 10 11 12; 
do
	sw=$(($i+69));
	led=$(($i+61));
	echo $sw > /sys/class/gpio/export;
	echo $led > /sys/class/gpio/export;
	echo out > /sys/class/gpio/gpio$led/direction;
done;

export PATH=$PATH:/usr/local/bin

echo "rcS Complete"